嵌入式计算机 | Flash电子盘 | 嵌入式显示器
常见问题 | 资料下载 | 驱动下载
 PC/104+ & ATX Boards                

PC/104+ boards are small computers packed into the industry standard PC/104+ form factor. Each PC/104+ board is a combination of specific baseboard (SB) and matching computer-on-module (CM) implementing of most of the functions.

Mini-ATX boards are small computers packed into the industry standard Mini-ATX form factor. Each Mini-ATX board is a combination of ATX baseboard, the same in all products, and the specific computer-on-module implementing of most of the functions.

SBC-iVCF Features

"SB Option" column specifies the P/N code of SB-iVCF required to have the particular feature.  "CM Option" column specifies the P/N code of CM-iVCF required to have the particular feature. The SBC-iVCF content is the combination of features provided by the attached CM-iVCF and features implemented on SB-iVCF. To have the particular feature, both CM and SB options of that feature must be implemented.
"+" means that the feature is always available, regardless of P/N code.

Feature Specification SB
Option		 CM
Option
CPU
DRAM
Flash Disk		 See Features List of  CM-iVCF module    
COM 1 RS-232 levels. Interface options:
- FPC connector >> cable >> DB-9 module
- RJ11 connector on front panel
+
F
+
+
COM 2 RS232 or RS422/485 drivers. Interface through 100-mil header on front panel X,F +
Harddisk PIO and UDMA-133 modes. IDE and S-ATA interfaces:
FPC connector >> cable >> standard 40-pin IDE header		 + +
Ethernet One or two 100Mb ports. RTL8139 controller. Interface options:
- FPC conn >> cable >> module with RJ45 conn and LEDs.
- RJ45 connectors and LEDs on front panel
E
E,F
E
E
CRT Monitor Interface options:
- FPC connector >> cable >> module with HD15 VGA conn.
- HD15 VGA connector on front panel
+
F
+
+
LCD Panel 51-pos FPC connector for interface to TFT panels L +
PS/2 Headers for PS/2 cable/connector + S
PCMCIA / Card Bus TI PCI1520 controller. Support for 16-bit PCMCIA and 32-bit CardBus standards. Single or dual PCMCIA / Card Bus slot with card guides, for cards type I, II and III. C +
USB 4 x USB-2 ports, 480 Mb/s. Interface options:
- Headers to USB cable with connector (2 ports)
- USB connectors on front panel (2 ports)
+
F
+
+
Sound Header for standard cable/connectors for Microphone (mono), Line input and Speakers (stereo) + AT
Touchscreen Header for interface to resistive touch screens + AT
PC104 ISA bus through standard PC/104 connector P +
PC104+ PCI bus through standard PC/104+ connector R +

Electrical, Mechanical and Environmental Specifications

Power Supply 5.0V @1A and 3.3V @1A (typical)
Dimensions Without front panel - 96 mm x 91 mm
With front panel - 111 x 91 mm
Height ranges from 10 mm to 30 mm, depending on the connectors and heatsink assembled. Height specified includes the CM-iVCF module.
Operation temp (case)
Commercial:    0o to 70o C
Extended: -20o to 70o C
Industrial: -40o to 85o C. Click for availability note
Weight 100 - 300 gram, depending on connectors and heatsink assembling.
Storage temperature -40o to 85o C
Relative humidity 10% to 90% (operation)
05% to 95% (storage)
Shock 50G / 20 ms
Vibration 20G / 0 - 600 Hz
MTBF > 100,000 hours
北京朝阳区祁家豁子甲8号马甸经典家园B座304室 010-82013580 传真：010-82028111
Copyright@1999 - 2006 LANDMARK. All rights reserved. 罗达麦海 版权所有. 京ICP备05030145号