|
|
| Computer-on-Module's
CompuLab's Computer-on-Module's are full-featured single board computers designed for mezzanine attachment to custom application through miniature high-density connectors. They are available with ready-to-run packages for Linux, Windows CE and Windows XP.
|
CM-iVCF
Features |
  |
The "option" column
lists the configuration code for specifying the particular
feature's value.
"+" means that the feature is always available. |
|
CPU & Core logic |
| Feature |
Specifications |
Option |
| CPU |
VIA CPU architecture, using either C3 or
C7 processor,
X86/Pentium compatible, up to 1000 MHz |
C |
| Internal Bus |
64-bit, 133 MHz |
+ |
| Cache |
64 + 64 KB L1 and 64 KB L2 Cache |
+ |
| Core Logic |
DMA and Interrupt controllers,
Timers |
+ |
|
| Memory and Busses |
| Feature |
Specifications |
Option |
| DRAM |
64 - 256 MB DDR, 266 MHz, 64-bit |
D |
| BIOS Flash |
1/2 Mbyte, on-board
reprogrammable |
+ |
| NAND Flash Disk |
32 - 512 Mbytes |
N |
| External Busses |
PCI, LPC, AC97 and simple Local Bus |
+ |
| AC97 |
AC97 / AMC97 Rev 2.1
compliant |
+ |
| PCI bus |
32-bit, rev 2.2-compliant, 132 MB/s,
5-volt tolerant
Arbiter and clock for 4 masters |
+ |
| LPC bus |
Host, 33 MHz, Intel LPC v1.0 compatible |
+ |
|
| Peripherals |
| Feature |
Specifications |
Option |
| Graphics Controller |
Dual head, resolution up to 1600 x 1200,
16-64 MB frame buffer in system memory, 2D/3D hardware accelerator. |
+ |
| Display Interface |
LCD - 18-bit TFT (parallel RGB)
CRT - 24-bit resolution (analog RGB), 250 MHz RAMDAC
TV - on-board DVI port and VT1622 encoder, PAL / NTSC |
+
+
V |
| MPEG-2 Decoder |
Full speed DVD playback |
+ |
| USB |
Four Host USB 2.0 ports, 480
Mbps, EHCI / UHCI compliant |
+ |
| UART's |
Two UART's, including flow
control |
S |
| General
Purpose I/O |
4 lines from chipset plus 20 lines from
Super-I/O |
+ |
| Hard Disk
Interface |
IDE and
S-ATA interf., UDMA-133
mode, 70 MB/s transfer rate |
+ |
| LPT - Parallel Port |
Bi-directional with EPP
mode. |
S |
| Floppy Disk Interface |
Routed through LPT pins |
S |
| Keyboard & Mouse |
PS/2 or USB or redirection from serial port |
+ |
| Infrared (IrDA) Port |
Up to 115Kbps in SIR mode, 4Mbps in FIR
mode |
S |
| Ethernet |
MAC & PHY, 10/100BaseT,
Activity LED's. |
E |
| Audio codec |
Phillips UCB1400, AC97
interface, mono microphone input, stereo line input and 25 mW output for active speakers |
AT |
| Touchscreen ctrl. |
A part of the UCB1400 codec chip. Supports
resistive touch panels. |
AT |
| RTC |
Real Time Clock, powered
by external lithium battery |
+ |
| Analog inputs |
5 channels, 8-bit |
S |
|
Electrical,
Mechanical and Environmental Specifications
|
| Supply
Voltage |
3.3V and 5.0V |
| Power
consumption |
8 - 12 watt, depending on
configuration and CPU speed |
| Dimensions |
70 x 86 mm. Height: 21 mm
w/heatsink or 10 mm w/o heatsink |
| Weight |
60 gram w/o heatsink, 130 gram with
heatsink |
| MTBF |
> 100,000 hours |
Operation
temperature
(on heatsink)
|
| Commercial: |
0o to 70o C |
| Extended: |
-20o to 70o
C |
| Industrial: |
-40o to 85o C |
|
Note: user
must assure that heatsink temperature would not exceed allowed
maximum. In still air heatsink temperature can rise up to
50癈 above ambient. Heatsink should be cooled by airflow or
heat extruders. |
|
| Storage
temperature |
-40o to 85o
C |
| Relative
humidity |
10% to 90% (operation)
05% to 95% (storage) |
| Shock |
50G / 20 ms |
| Vibration |
20G / 0 - 600 Hz |
| Connectors |
3 x 140 pin, 0.6 mm. Insertion / removal
- 50 cycles |
|
|
|
